- Powder Diameter: 50-200 Mesh
- Final Products Moisture: 6.5-7.5 Milli
- Raw Material Water Content: Less Than 13-15 Milli
1. Main power: 30KW, 380V/50HZ.
2. For wood chips from 10-20mesh milled into 50-200mesh.
II. Main Technical data
1. Raw material water content less than 13-15‰, output will be reducing by 5‰ if moisture increses by 1‰.
2. Final products moisture is 6.5-7.5‰
3. Output 100-250Kg/hr
III. Machine details and working process
1. Machine is composed of induced draft fan, dividing unit for gas and solid materials, main mill, small filter, big filter, dust collection, and outlet for final products.
2. Working process:
Feeder-divider of gas and solid-main mill- divider of gas and solid- first filter (rough material back into main mill and fine material into divider)-second filter (rough back to main mill and qualified material as final)-final material-dust collection
IV. Installation and Adjust
1. Installation requirement
(1) Fix the place according to ground bolts
(2) Not over ±5mm of ground level
(3) Adjust according to customer's requirement, but over 6.5*3m.
2. Equipment adjust
(1) to check the equipment combination and installation
(2) to check the running direction, and block or not
(3) without load running, should not be vibration or mechanic noise
V. Instrucitons on production
1. Material inlet
(1) moisture inlet less than 10%
(2) material feeding evenly
(3) metal, brick, or stone etc. are strictly prohibted in
2. Machine parts
open the induced draft fan to push out the inpurity
Open every motor parts and fan to see normal or not
Adjust the feed stirred cage and divider running (digital inverter)
Cooling water shall be supplied for milling tank.
VI. Machine operation sequence
Accordign to the electric cabinet
VII. Maintain and lubrication of machine
VIII. Quick-wear parts
Milling balls, milling loops, swing-arm bearing